Perfect for wing spars in 6mm Depron, FFF, Fan Fold, EPP, etcCutting Carbon - To cut carbon, use a Dremel motor with an abrasive cutting wheel for the cleanest cut possible. You can also use a fine tooth hacksaw. Be sure carbon is held securely in place, be careful not to crush. Tape around area to be cut to prevent splintering or separation of fibers. Wear eye protection and dust mask.
Outside Diameter: 0.125" (3.2mm)
Made in the USA
- As Advertised Review by Mark Occhionero
- Review by Greg Harper
- Review by Alan Ormand
But You always have your bamboo skewers, even though bamboo is a fast grower , drying time and that awful sharpening process. At 2000 or so skewers per meter, it is alot of bamboo for the buck. My money is on the carbon. (Posted on 8/24/2009)