Cutting Carbon - To cut carbon, use a Dremel motor with an abrasive cutting wheel for the cleanest cut possible. You can also use a fine tooth hacksaw. Be sure carbon is held securely in place, be careful not to crush. Tape around area to be cut to prevent splintering or separation of fibers. Wear eye protection and dust mask.
Outside Diameter: 0.1250" (3.175mm)
Inside Diameter: 0.067"
Weight: 6.25 gm
Same Carbon size used in the F-22, Mig-29, Sukoi, and many other popular foam kits.
Great for wing spars in, fuse spars, and pushrods.
Made in the USA
You may also be interested in the following product(s)
- ok Review by Marcel Joe Deman