0

Diatone GT200 Race Ready Bundle - 2017 Version

Diatone GT200 Race Ready Bundle - 2017 Version

Sku:

GT200-86

Availability: Out of stock

Availability: Out of stock

From: $344.98

To: $403.97

Price as configured: $0.00

Quick Overview

Diatone Race Ready Drone Combo - Just add Fun!

Diatone GT200 Stretch FPV Racing Drone Race Ready Drone Combo

Diatone GT200 Customer RX Install & Configuration

Grayson Hobby has the professional staff and pilots which is required to check and calibrate EVERY Race Ready RTF quad.
This is a very time-consuming process, but we can assure you, every component will be in perfect working order.  Our professional staff will custom solder a FrSky Receiver

Software Setup

The Grayson Hobby professional staff loads our own Flight Controller configuration file which has been tweaked by our professional pilots. We also enable a few features which do not come standard from the factory making the Diatone GT200 from Grayson Hobby that much better and enjoyable.

 

Transmitter Setup

The Grayson Hobby professional setups and programs the FrSky Transmitter and loads our own Sofware on the included mico SD card file. This is a literally a Turn Key Professional Drone!

F3 | OSD | SP2 V2 48CH VTX | BLHeli_S | HS1177 600TVL Camera |PNP

 Diatone 2017 GT is the 3rd Generation of the Diatone GT Series and continues the minimalist design of the GT series with the idea of "reducing the level of association between components", using a simple design to facilitate installation and replacement pars. This GT version has 8 updated modification which improved the design.

 

FURY F3 Flight Controller

The Diatone GT 200 Stretch uses Fury joint designed F3 flight controller. The F3 flight controller uses MPU6000 six axis gyro and 8k / 8k settings, integrated 5V / 1.5A BEC, OSD, and a 3.3v/500A independent power supply for the receiver. THis can be used as 5V or 3.3v on the control pad, or you can use the extra power from the 3.3v BEC module.

Power System Specifications

Sunnysky ESC Speed Controller 

The new 30A ESC supports Dshot 300 / 600 datching EDGE custom 2306 silver motors to provide a crazy power to wieght ratio.

  • Sunnysky ESC Specifications: 
  • Supports: Dshot300/600 
  • Input Voltage: 3-4S Lipo 
  • Continuous Current: 30A 
  • Burst Current: 40A (10s) 
  • MCU: Silabs EFM8BB21 
  • Size: 30x15x6mm 
  • Weight: 5g

 

EDGE Brushless Motors

EDGE 2306 2450KV - Edge silver motors provide a crazy power to wieght ratio

 

Flash 5112 Gemfan Propeller

the 5112 was designed to provide the ideal airfoil to match the motor. Pop surface pressure, speed rate, airfoil curve, thickness and more were analyzed and optimized to match the 2205-2206 type motor. These slight but effective improvements provide great performance results.

 

FPV System

The HS117 camera and SP2 V2 transmitter are a great match. The Sony Super 2 CCD provides a great image while the 2.3mm lens allows almost 120 degree angle of view. the SP2 V2 VTX provides 48 channels and 0/25/200/400mW power selection.

  • 600TVL high picture quality
  • 2.3mm Lens
  • 1/3” SONY SUPER HAD II CCD
  • 2D-DNR (Digital Noise Reduction)
  • Low Power Consumption (70mA)
  • Mirror function
  • Low illumination: 0.01Lux

 

Motor Vibration Suppression System

The separated structure design suspends the motor and provides complete isolation between teh motor and the frame. This provides an effective reduction of vibration transmitted to the frame and increases flight controller precision.

 

Battery Mount

Uses a wider anti slip battery strap to add 50% more strength

 

Please note this Race Ready Combo does not come with Battery and Battery Charger - the options we suggest are below!  Remember, batteries / lipo quality does matter!

You may also be interested in the following product(s)

Write Your Own Review

You're reviewing: Diatone GT200 Race Ready Bundle - 2017 Version

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating