0

More Views

Diatone GT R90 FPV Racing Drone - White - PNP

Sku:

DT-PN18-GTR90/207

Availability: Out of stock

$169.99

Quick Overview

2018 GT-R2 - R90 - PNP - White

Diatone GT R90 - Normal X - White

Why Purchase from Grayson Hobby?  Grayson Hobby is in constant contact with the designer in which we collaborate to bring you the BEST tuning.  We do not just sell, we fly, build, configure, and repair our own FPV Drone racers so when something comes up, we have the experience, knowledge, and staff to help you get back up in the air. Stay Tuned for upcoming how-to videos for this and all new Diatone Products.


Recommend Batteries (From Video)

LongBow 450 3S 11.1v with XT30c - click here
LongBow 450 2S 7.4v with XT30  - Click here
GemFan 2040 (on 2S or 3S) - will need longer screws (not included)  -  GemFan Props
GemFan 1940 (4S) - will need longer screws (not included) - Click Here


PIDS & Battery Selection
The default tuning is for 3S Lipo. If you want to use 4S (14.8v) you will need adjusting the default betaflight tuning. Without tuning betaflight and running on 4S, will cause the motors to run too hot and burn up - voiding warranty
For the latest Updated PIDS, click here to download

 

GT | R | 90 Specifications
  • Flight Controller: Fury F4
  • Gyro: MIC20689 32K Six-Axis
  • OSD: Betaflight OSD
  • Blackbox: 128M Flash On board
  • On Board BEC: 1A 1.5 Burst 5V BEC
  • External Sensor: Current Sensor incorporated in the XT30
  • Camera: G1.Sniper CCD Sensor 600 TVL (Similar to HS1177 micro or Swift Micro)
  • VTX: TBS Unify 5V 25/200/500/800
  • ESC: F15HV 4S BL Heli_S ESC, Dshot 600
  • Motor: EDGE Racing 1104 6000KV


This version of the GT90 is a Plug and Play - PNP - which comes with white propellers, white motor / prop guards, and white antenna mount. If you prefer the colored version please purchase the color accessories - need to order 2 for a complete set
The PNP (Plug and Play) version comes without battery, charger, receiver or remote control.



Why Diatone

Under the DIATONE brand, DIATONE Series GT, the high-performance drone named R (Racing Sport), is also the highest version of the current GT series. The first generation of GTR models, the choice of advice configuration is very rigorous, meanwhile, our strategic partners ( Sun sky, Fury and TBS team) join, will make the overall performance more powerful. The R90/207 uses the common type C-Beams in appearance. When overlooking, C-Beams shows a gradual narrowing shape and feels a slimmer back. The outer side of the camera has two replaceable oval decorative parts, not only seems naughty and lovely but also protect the side panels from damage. Color accessories are also used in C-beams, Motor Mount and prop protection. A variety of colorful combinations that shows yourselves style. R207 small and cute shape is also a good gift.

The GTR90 has an ultra-low gravity design and 2017GT MVS, there was another design breakthrough: FC&ESC Mount (in after referred to as FEM).
FEM is a collection of FC&ESC&TBS UNIFY as one of the design, using the M3/20mm assembling-hole distance without the use of auxiliary tools, TBS can also be installed, compatible with FC and ESC, to achieve the two layer structure, but the total height of only 20mm.

• The installation of electronic devices for mini models is not easy, but FEM makes installation easy.
• The use of advanced laser 3D printing technology, high dimensional accuracy.


The resin material used for 3D printing has the certain elasticity and can reduce vibration when being impacted, and the electronic equipment is not easy to be damaged.

FEM uses the same m3/20mm mount size as the fight controller. It can be installed directly without modification.

Since TBS UNIFY doesn’t have an available fixed position, it can’t be installed by screws, and not allow using glue bonding way in producing or usage mode.
Therefore, we adopt a fixed position design to limit TBS UNIFY movement range. TBS can be fixed after inserting, and no other tools and accessories are needed during the assembling process, so it’s very convenient to install.

FEM applies to the most M3/20mm specifications of FC and ESC, 3D printing screw length of 13mm, most of the two layers of flight controller can be properly installed and the total height of FEM is only 20mm, applicable to any type of model. The resin material used for 3D printing has a certain elasticity and can reduce vibration when being impacted, and the electronic equipment is not easy to be damaged.

 

The Awesome Camera (the heart of FPV)

As the production model that uses TBS VTX, G1 + TBS’s combination has the best performance. 

  • Smaller Volume: 19mm*19mm*19mm 
  • Lighter weight: 5.0g (excluding accessories)
  • Larger voltage range: 5-26V
  • Image sensor: 1/3” SONY Super HAD2 CCD
  • Horizontal Resolution: 600 TVL
  • Lens: 2.3mm (M8) FOV 130
  • Signal System: PAL
  • S/N Ratio > 60 dB
  • Electronic Shutter Speed: 1/50-100,000; NTSC 1/60-100,00
  • Min. Illumination:0.01Lux@1.2F 
  • Current: 12V@60mA/ 5V@130mA

 

Team BlackSheep

  • Operating Voltage: 4.5 – 5.5V
  • Supply Current: 600mA
  • Operating temperature: watch for normal airflow
  • Audio carrier Frequency: 6.5 MHz
  • Video Input Impedance: 75 Ohm
  • Weight: 5g (with SMA, without antenna)
  • Antenna Connector: RP-SMA Female socket with screw mounting holes
  • Video Format: NTSC/PAL
  • Output power: 13dBm (25mW), 23dBm (200mW), 29dBm (800mW*)

*HAM License is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure

 

Furry F4M (Flight Controller)

Specifications

  • 6-Axis: ICM20689 (High-Speed 32khz gyro)
  • Flash 16m
  • OSD: AT7456
  • BEC 5V 1A (Burst up to 1.5A)
  • Input 2-4s Lipo (please note 4S will need betaflight tuning)
  • Size 30 x 30 x 5.6mm
  • Mounting 20mm / M3
  • Weight 3.5g

 

AMAS XT30 & CURRENT METER MODULE
See your amp draw in real time

  • PLUG BRAND: AMASS
  • GOLD PLATING: YES
  • RATED VOLTAGE: 4S (16.8V)
  • CONTINUE CURRENT: 30A
  • BURST CURRENT: 50A (15S)
  • WEIGHT: 17g

 

F15HV DSHOT600

  • INPUT VOLTAGE: 2-4S (7.4V – 16.8V)
  • CONTINUE CURRENT: 15A x 4
  • BURST CURRENT: 20A (10S)
  • BEC: NO
  • MCU: EFM8BB21
  • SIZE: 30 x 30 x 5mm
  • MOUNTING: 20mm/ PHI 3mm
  • WEIGHT: 6g

 


The Diatone GTR90 used the SunnySky EDGE1104 6000KV /4S, the best results for 16.8V/10.8A/205g efficient collocation of 20303 propellers, 4S 43.2A (total current) under the maximum 1:7.45 thrust-weight ratio.

You may also be interested in the following product(s)

Customer Reviews

Great produce but greater customer service. Review by Mark Scott
Rating
Great little flyer, fun fun fun. Had some issues that Grayson helped me with (all my issues). Customer service is super! (Posted on 1/17/2018)
Gtr90 Review by Jason Boyce
Rating
Has very nice build quality and flies very good out of the box. Wish it had a beeper. (Posted on 12/27/2017)
Disappointed Review by Gary Sircy
Rating
Was really excited for this little quad since it's specs are unreal for a 2". First flight it had insane twitches. Come to find out, the motors we're extremely loose (the bearings, not the screws) I reached out to Grayson but only got an apology. After replacing the motors, it flies great but didn't plan on having to do that on a bind and fly. Just be prepared just in case. (Posted on 12/18/2017)
Nice flying drone Review by James Rokowski
Rating
The GT R90 is a good flying drone.I did have an issue with mine that some of the props that came with it would hit the frame. A little investigating found that the upper frame was a little off center by about 1.5mm in the front. Been using 1.9" props and all is good. will order some better 2" props and give it a try, looks like they may be okay if consistent in size. Deducted point for the poop props that come with it. (Posted on 12/11/2017)
Oh boy! Review by Hughlet
Rating
I have been FPV flying for about 3 years, I started with the Rise Vusion (Great for beginners) and move up to a Arris c250 V2 not very durable for racing but is fun to fly. About a year ago I purchased a Diatone GT 200 and I found out what a real race drone was. It is such a great feeling to buy something that exceeds you expectation. The only problem was flying one of these drones in the backyard or around cars and houses is just unwise. So every time I need an FPV fix I had to pack up my gear and find a place to fly, until I purchased the GT R90 and Oh boy! On 2s it's perfect for zipping around the house and back yard, on 3s it's hard to believe you are not flying a much bigger and faster Quad. Thank you Graysonhobby for exceeding my expectation your review of the GT R90 is spot on. (Posted on 12/10/2017)
great little quad Review by dave
Rating
geat little quad, Picked mine up at the store after seeing previews online. I believe Grayson hobby was one of the first in the states to have them in stock. Since there was very littile info available about the GT R90, the guy's at the hobby shop filled me in with the much needed information on how to get it hooked up, and even offered me a dump of thier Betaflight. The stock pids will get you flying straight out of the box and then you can tune to your liking. I get 4 min. flights with the 450mah batts. that GH sell. (Posted on 12/5/2017)
I Highly recommend this Store! Review by Robert J Hommen
Rating
Grayson shipped my Diatone GT R90 right away and even will respond to questions like a good Hobby store should.
I am impressed with there service,support and informative YouTube videos! (Posted on 11/28/2017)

Write Your Own Review

You're reviewing: Diatone GT R90 FPV Racing Drone - White - PNP

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating