More Views

Eachine Wizard X220S FPV V1.1 | ARF | Drone Racer | F4



Availability: Out of stock

Regular Price: $199.99

Special Price $179.99

Quick Overview

Eachine Wizard X220S FPV ARF | Dshot600 | Drone Racer | F4

Eachine Wizard X220S V1.1 FPV ARF | Drone / FreeStyle Quad | F4


Please note there is no support for the ARF as this is more of a component build.  Grayson Hobby does not support the ARF as there is too many variables, radios, receivers, software configurations.  This is sold as a component build only - there will be no technical software support.  


Package included:

1 x Eachine Wizard X220S frame kit
2 x 2206 2300KV motor CW 
2 x 2206 2300KV motor CCW
1 x Eachine 30A BLHELI_S  4 in 1 ESC
1 x BF3.1.5 Omnibus F4 V2 flight controller
1 x 800TVL camera 
1 x 5.8G 72CH 25MW 200mw 600MW switchable VTX
10 x Eachine 5051 3-blade propeller purple CW
10 x Eachine 5051 3-blade propeller purple CCW
1 x 30° Camera Mount(For Foxeer 4K Box /Gopro session)
1 x Pagoda antenna
2 x Battery strap
2 x Wrench
Item Specification
Eachine Wizard  X220S
Wheelbase: 220mm
Frame arm: Use light composite materialCarbon Fiber (V1.1)
Weight: 356g (without battery and camera mount)
Take off weight: 561g
Use light composite material. Carbon Fiber (V1.1)
4mm thickness and 15mm width frame arms, the width is 5mm less than Eachine Wizard X220.
Frame kit with camera angle scale and 30° camera mount for Foxeer 4K Box Gopro session. 
Anti-vibration sponges to protect the racer frome crashing.

Eachine  MN2206 2300KV motor

KV: 2300
Max thrust: 1100G
Length: 35MM
NO.OF cell: 3-5S
Diameter: 28MM
Framework: 12N14P
Shaft: 3MM
Propeller: 5 inch
Weight: 28g
Eachine 30A BLHELI_S  4 in 1 ESC
Con. current: 30A
Peak current (10S): 35A
Input  voltage: 2-5S
Programming: YES
Firmware: blheli_s
Weight: 28g
Size: 36*36MM

Eachine 1179 800TVL CCD camera 
Color: purple
Sensor: CCD
Resolution(horizontal center): 800TVL
Shell size: 25mm*25mm
Weight: 11g
Resolution: PAL: 1980H×1080 (2MP) NTSC: 1980H×1080V (2MP)
Format: PAL/NTSC switchable 
Video output: 1.0Vp-p/75Ω
Automatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB.
Exposure mode: electron exposure
Electronic shutter: 1/50(1/60) - 1/100000 S
Gamma correction: 0.45/1.0
Synchronization method: internal synchronization
Lens: standard 2.8mm lens 
Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V)
Workig current: 70mA (low power consumption)
Workig temperature: -20℃--60℃
Humidity: 0%~98% 
Strong backlighting effect

5.8G 72CH 25MW 200mw 600MW
switchable transmitter

Video Format  : NTSC/PAL
Channel: 72CH
Operating Temperature : -10~85℃
Connector: SMA Female (Inner hole)
Antenna Connector:  RP-SMA male (Inner needle)

Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL CCD iRangeX iRX-i6X RTF

BF3.1.5 Omnibus F4 V2 flight controller
Size: 35x35mm
Mounting hole: 30.5x30.5mm
Firmware: betaflight_3.1.5_OMNIBUSF4SD
Input voltage: 2-6S
Sensor: SPI Sensor MPU6000
Berometer: BMP280
Slot: standard SD card slot 
BEC: 5V/3A
STM32 F405 MCU, Runs betaflight_3.1.5_OMNIBUSF4SD, could run faster loop time. 
Using F4 MCU controls OSD over SPI bus in DMA mode.
OSD Configation has been included in Betaflight GUI. 
Built-in 5V/3A BEC.
Built-in galvanometer.
With LC filter.

Eachine 5051 3-blade propeller
Color: purple
Quantity: 10 Pairs
Mounting Hole: 5mm

You may also be interested in the following product(s)

Customer Reviews

Overall a good product, some corrections on my part. Review by Greg
I wanted to make sure that I corrected my previous review - With Grayson's help, we concluded I did indeed receive the carbon fiber arms. I misunderstood the LC filter reference, the description was talking about the built-in filter in the Flight Controller. We did confirm that the LED display for the Vtx was missing and Grayson is helping to get it replaced. I have been forced to learn a lot about how all the parts work together but it is a significant part of the hobby and makes it more fun. Thanks Grayson. (Posted on 1/11/2018)
Had some issues right out of the box Review by Greg Goode
Overall I feel that this quad is decent for a noob like me as I am not quite ready to build from scratch. I purchased from Greyson because they do some customizations ahead of time (I believe). The description says they replace the carbon wrapped arms with solid carbon fiber and they include an LC filter to help with a known VTx noise issue. The quad did not come with carbon fiber arms and I do not see an LC filter. One of the LEDs on the rear LED strip was loose and flickers randomly. The Vtx appears to be missing the LED that displays the channel and wattage output. I have submitted a support request and hope that they can correct everything. (Posted on 1/9/2018)
AMSOME Review by Carolyn Calupca
A great drone to start off with! Extremely durable and fast. Lots of power to fly around with. (Posted on 10/8/2017)
Great product backed by outstanding customer service! Review by Jay D. Haacke
Having ordered this product from China, it was so refreshing to buy the same from Grayson, who thoroughly checks out the product before shipping. They even include some setup notes to help get things up and running without fuss. I highly recommend this product and especially Grayson Hobby! Their Youtube videos are excellent as well! Keep up the good work! (Posted on 10/6/2017)
Still not Up and Running Review by Thomas Taquino
A week or so later and still not flying. Very depressing! (Posted on 9/16/2017)

Write Your Own Review

You're reviewing: Eachine Wizard X220S FPV V1.1 | ARF | Drone Racer | F4

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars