More Views

FliteTest RotorBones Flight Pack - QuadCopter



Availability: In stock


Quick Overview

FliteTest RotorBones Flight Pack - QuadCopter

FliteTest RotoBones - QuadCopter Flight Pack

From the makers of most of the FliteTest combos, so you know this is super high quality!

Kit Contents:

  • 2 x CCW M2208-17 (1000kv) brushless motors
  • 2 x CW M2208-17 (1000kv) brushless motors
  • 4 x HW 20Amp Speed Controller (ESC)
  • 2 x 8 inch ClockWise Props (CW)
  • 2 x 8 inch Counter Clock Wise (CCW)
Motor Features:
  • Input voltage: 8.4 to 11.1 volts
  • Max Continuous current: 8 amps/60 seconds
  • KV: 1100
  • Weight: 1.39oz
  • Max Watts: 100W
  • Dimession: 27.5mm x 26mm
  • Prop range: 9x5 on  a 3S - 11.1V lithium to 10x5 on a 2S - 7.4V lithium
  • Multi Copter weight: 2-4lbs
Speed Controller (ESC) Features:
  • Up to 20 Amp continuous current with proper air flow, 25Amp peak
  • 2-3S Li-Po 
  • Auto Timing
  • Auto Throttle Calibration
  • Auto Cell Detect
  • Safe power-arm mode prevents accidental starts
  • Auto Program low voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Lipo (9V) 70% of battery starting voltage
  • Auto motor shut down if signal is lost or there is interference
  • 14AWG on the battery input and on motor output lead
Continuous Maximum Current: 20A with reasonable cooling
Maximum Burst Current 25A <30 sec with cooling
Input Voltage: 7.2V - 11.1V (2s - 3s)
Output Wire 14AWG
Length: 1.25 in (32mm)
Width: 0.94 in (24mm)
Height: 0.31 in (8mm)
Weight: 0.77 oz (21.9g)
Internal BEC 3A - Linear
Suggested Servos 2 Li-Poly=4 servos, 3 Li-Poly =3 servos
Max RPM 20,000 RPM with 14 pole motor
35,000 RPM with 8 pole motor

Write Your Own Review

You're reviewing: FliteTest RotorBones Flight Pack - QuadCopter

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars