FOAM SAFE CA
Aerosol Accelerator
The surface properties of some materials, such as being acidic
or having very low moisture content, slow down the curing of cyanoacrylates. CA
accelerator is formulated to harden CA in ten seconds or less. Accelerator
allows large gaps to be filled in loose fitting joints and cures the excess CA
that sometimes oozes out of joints so that objects can be handled within seconds
without the worry of sticking ones fingers to the parts. Accelerator makes the
repair of household items much easier.
INSTA-SET is a catalyst which acts as an accelerator that allows
all CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET significantly enhances a joints strength. For difficult to bond materials, INSTA-SET can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly.
INSTA-SET is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators.
It is compatible with all surfaces, even clear plastic and white foam,
depron, & EPP.
