RedCon Phoenix 210 FPV PNP - White

Sku:

P210-FW

Availability: In stock

Only 5 left

Regular Price: $189.99

Special Price $129.99

OR

Quick Overview

The RedCon Phoenix 210 - PNP - Frame - Power System - Flight Controller - Combo is a revolutionary design which is a high quality, lightweight frame which allows for amble room for your electronics. Perfect for the hobbyist just starting out or want to modular build, simply just add your radio Reciever, setup Cleanflight, and you are ready to fly. Perfect for beginners or those slowly getting into the FPV Racing Hobby. Unlike some other models that are all one color, the red and Green LEDs make this very easy to see in the air

RedCon Phoenix 210 -  Frame - Power System - Flight Controller - PNP

The RedCon Phoenix 210 - PNP - Frame - Power System - Flight Controller - Combo is a revolutionary design which is a high quality, lightweight frame which allows for amble room for your electronics. Perfect for the hobbyist just starting out or want to modular build, simply just add your radio Reciever, setup Cleanflight, and you are ready to fly. Perfect for beginners or those slowly getting into the FPV Racing Hobby.  Unlike some other models that are all one color, the red and Green LEDs make this very easy to see in the air

 

Features:

  • Pure carbon fiber and high strength ABS construction
  • 1/3 Sony Effio 700tvl  mini ccd camera 12volt featuring a 2.8mm lens (roughly 130 Degree FOV)
  • TS5823 200mw 32CH 5.8ghz video transmitter
  • Naze 32 rev6 (6DOF) Flight Controller
  • 2mb onboard dataflash(blackbox)
  • Fully programmable led tailight bar with Buzzer preinstalled.
  • 4 x RedCon MN2204 2300kv MultiRotor AntiGravity Brushless Motors 
  • 4x 15 Amp Blheli flashed esc with cleanflight passthrough for programming and updates
  • presoldered for PWM: PPM, or SBus input, Spektrum Satellite capable(Soldering required)
  • Speed controls are protected from prop strikes and feature bright red/green leds for orientation.

 

 Notes:

  • Naze32 flashed with cleanflight
  • ESC running BLheli with Oneshot Enabled, damped light capable in Blheli software.
  • Blheli programming via Cleanflight passthough (no Flash tool required, just plug into Naze USB port)
  • Naze 32 rev6 Acro(6DOF) Flight Controller w/2mb blackbox
  • RP-SMA antenna mount
  • CCD camera is programmable with OSD cable(not included)

 

Frame Kit Specs:

  • Shaft distance: 260mm
  • Dimensions: 200x170x65mm
  • Frame weight: 474g
  • Materials: 3mm carbon fiber main frame /Arms 

 

Power Distribution Board Specs:

  • Connector: Xt60
  • Input: 2-4S LiPOs
  • Output: 5V@1A via external BEC
  • Dimensions: 36x36x5.5mm
  • Weight: 8.5g

 

Speed Controller Specs: 

  • Input voltage: 2-4S LiPo
  • Dimensions: Φ23x5.5mm(exclude capacitor)
  • Weight: 9.5g

 

 

Speed Controller Features:

  • One-shot 125 is supported, Equipped with external oscillator and flashed with the popular BLheli program for quick response, smooth throttle and low running temperature. 
  • High quality electronics parts are used to make sure all esc with high quality and reliability.
  • The ESC can be installed under motor mount of arms, does not take any precious space in the central boards, and makes wiring much easier and neat.
  • Each ESC with a bright green/ red LED light to indicate direction of PHOENIX  210.

 

 

RedCon 2204 2300kv AntiGravity Brushless Motor Specs:

  • Stator Diameter: 22.0 mm(0.866 in)
  • Stator Thickness: 4.0 mm(0.157 in)
  • No. of Stator Arms: 12
  • No. of Magnet Poles: 14
  • Motor Wind: 15 Turn D
  • Motor Kv: 2300 RPM / Volt
  • No-Load Current (Io): 0.7 Amps @ 10 volts
  • Max Continuous Current: 13 Amps
  • Max Continuous Power: 150 Watts
  • Weight: 25 Grams(0.88oz)
  • Outside Diameter: 27.8 mm(1.094 in)
  • Shaft Diameter: 3.0 mm(0.118 in)
  • Body Length: 17.0 mm(0.669 in)
  • Overall Shaft Length: 22.0 mm(0.866 in)
  • Max LiPo Cell: 2-3S (7.4v - 11.1v)
  • Motor Timing: 
  • Drive Frequency: 8kHz

 

Kit Includes:

  • RedCon PHOENIX  210 frame (assembled)
  • 15A BLHELI ESCS (installed)
  • 2204-2300KV Brushless motors (installed)
  • 1/3 Sony Effio 700tvl  mini ccd camera 12volt featuring a 2.8mm lens (roughly 130 Degree FOV) (installed)
  • TS5823 32CH 200mw 5.8ghz video transmitter (installed)
  • Power distribution board (installed)
  • 1 set 5045 propellers
  • Naze32 Flight Controller (installed)

 

Required: 

  • 1300~1500mah 3-4s (11.1v-14.8v Battery)
  • 5-6 channel TX/RX - Satellite
  • Micro USB cable for Cleanflight programming

 

 


RedCon Phoenix
RedCon Spedix
RedCon Phoenix

You may also be interested in the following product(s)

Write Your Own Review

You're reviewing: RedCon Phoenix 210 FPV PNP - White

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating