Loading...

DarwinFPV 240 Johnny5 HD FPV Drone RunCam Link Wasp - ELRS BNF

Special Price $349.99 Regular Price $359.99
Out of stock
SKU
DF-248
Looking for an exciting and economical FPV drone that delivers stunning HD digital video? Look no further than the DarwinFPV Johnny 5 240 5 inch FPV drone! This high-performance FPV Drone which features advanced digital video capabilities, making it the perfect choice for HD FPV Flying . With its powerful motor system and cutting-edge technology, the DarwinFPV Johnny 5 240 offers an unparalleled flying experience that's sure to impress. So why wait? Get your hands on the HD DarwinFPV Johnny 5 240 today and experience the ultimate combination of performance and affordability!
More Information
Flying LocationOutdoor
Skill LevelIntermediate
Copter Motor TypeBrushless
Quad Voltage4S - 14.8v
Quad ConfigurationBNF (Bind and Fly)
ManufactureDarwinFPV
Receiver TypeELRS

Grayson Hobby Edition Comes with Genuine RadioMaster RP1 ELRS Receiver Soldered and Installed and
RunCam Link Wasp HD Micro Kit for DJI

DarwinFPV- Johnny 5 Tehnical Data

  • Wheel base: 240mm
  • Frame arm thickness: 5.5mm
  • Frame kit material: 3K carbon fiber

DarwinFPV- Johnny 5 Reciver 

  • 2.4ghz ELRS Protocal - RadioMaster RP1 Receiver

DrawinFPV 2207- 2400KV Brushless Motor

  • Motor KV:2400KV
  • Idle Current (Io/10V):0.81A
  • Lipo Cell:3-4S
  • Weight:36.4g
  • Max Continuous Current:32A
  • Max Continuous Power:765W
  • Configu-ration:12N/14P
  • Prop adapter shaft:M5
  • Bolt holes spacing:16mm
  • Bolt thread:M3
  • 4 IN 1 50A BLHeli_S ESC

F4-50A stack

  • Continuous current: 50A
  • Peak current: 60A (10S)
  • Lithium battery section number: 2-6S
  • BEC: 5V2A
  • ESC weight: 10.8g
  • Firmware: BL_S
  • Maximum support throttle signal: DSHOT600
  • Mounting hole: M3 30.5 * 30.5mm

F4 Flight Controller

  • Lithium battery section number: 3-6S
  • BEC: 10V 1A, 4.5V, 3.3V
  • MCU: STM32F405
  • Gyro: MPU6000
  • OSD: AT7456E
  • Firmware: MATEKF405
  • Weight: 7.2g
  • Mounting hole: M3 30.5 * 30.5mm
  • Support barometer, black box
  • Bluetooth 
  • 5.8G 40CH 800mw VTX TX805P

RunCam Link Wasp HD Kit for DJI

The Runcam Link Wasp HD Camera and VTX Kit is another advanced video transmission module by Runcam and fully authorized by DJI that supports a 5.8GHz digital video signal and 720p 120fps image transmission. The Runcam Link Wasp HD Camera and VTX Kit is designed for FPV drones and it can be used with DJI FPV Goggles, which provide digital high-definition pictures and a transmission range of up to 4km. The Link system allows up to eight drones to fly simultaneously. Each operator has an exclusive channel, which helps reduce cross-interference and provides an optimal racing experience.

 

HD VIDEO SPECIFICATIONS

Phoenix Wasp HD Camera

  • Image Sensor: 1/3”
  • Resolution: 720p@120fps(4:3)
  • LENS: FOV D:155° H:125° V:96°
  • Shutter: Rolling Shutter
  • Coaxial Cable: 120 mm
  • Dimensions: L19mmxW19mmxH19mm
  • Net Weight: 7.5g

Link Air Unit

  • Input Voltage: 7.4-26.4V@ 4-9W
  • Operating Frequency: 5.725-5.850 GH
  • Transmitter Power: (EIRP) FCC/SRRC: <30 dBm; CE: <14 dBm
  • Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms
  • Max. Transmission Distance: FCC/SRRC: 4 km; CE: 0.7 km;
  • I/O Interface: Type-C, IPEX, 3-in-1 port,
  • Supported Flight Control System: BetaFlight
  • Operating Temperature Range: 0° to 40° C (32° to 104° F)
  • Coaxial Cable: 120 mm
  • Dimensions: 29x29x13mm
  • Weight(camera included): 27g
More Information
Flying LocationOutdoor
Skill LevelIntermediate
Copter Motor TypeBrushless
Quad Voltage4S - 14.8v
Quad ConfigurationBNF (Bind and Fly)
ManufactureDarwinFPV
Receiver TypeELRS
Write Your Own Review
You're reviewing:DarwinFPV 240 Johnny5 HD FPV Drone RunCam Link Wasp - ELRS BNF
Your Rating
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.