Comes with ELRS Receiver Soldered and Installed

DarwinFPV- Johnny 5 Tehnical Data

• Wheel base: 240mm
• Frame arm thickness: 5.5mm
• Frame kit material: 3K carbon fiber

DarwinFPV- Johnny 5 Reciver 

• 2.4ghz ELRS Protocal Receiver

DrawinFPV 2207- 2400KV Brushless Motor

• Motor KV:2400KV
• Idle Current (Io/10V):0.81A
• Lipo Cell:3-4S
• Weight:36.4g
• Max Continuous Current:32A
• Max Continuous Power:765W
• Configu-ration:12N/14P
• Prop adapter shaft:M5
• Bolt holes spacing:16mm
• Bolt thread:M3
• 4 IN 1 50A BLHeli_S ESC

F4-50A stack

• Continuous current: 50A
• Peak current: 60A (10S)
• Lithium battery section number: 2-6S
• BEC: 5V2A
• ESC weight: 10.8g
• Firmware: BL_S
• Maximum support throttle signal: DSHOT600
• Mounting hole: M3 30.5 * 30.5mm

F4 Flight Controller

• Lithium battery section number: 3-6S
• BEC: 10V 1A, 4.5V, 3.3V
• MCU: STM32F405
• Gyro: MPU6000
• OSD: AT7456E
• Firmware: MATEKF405
• Weight: 7.2g
• Mounting hole: M3 30.5 * 30.5mm
• Support barometer, black box
• Bluetooth 
• 5.8G 40CH 800mw VTX TX805P

VTX (Video Transmitter)

• Frequency: 5.8G Channels: 40CH
• Input voltage: 7V~24V
• 5V camera supply: 120mA(MAX)----25mW@12V 5V
• camera supply: 200mA(MAX)----200mW@12V 5V
• camera supply: 300mA(MAX)----600mW@12V 5V
• camera supply: 350mA(MAX)----800mW@12V Extra
• features: Smart audio
• Power supply: 5V output for Camera
• Output power: 25mW/200mW/600mW/800mW
• switchable Antenna connector: MMCX
• Cable connector: Solder pads
• Weight: 8g(excluding antenna)