DarwinFPV 240 Johnny 5 FPV Drone Analog - 2.4g ELRS receiver
Special Price $199.99 Regular Price $249.99
Out of stock
DarwinFPV 240 Johnny 5 FPV Drone Analog - 2.4g ELRS receiver
Details
Darwin240 Johnny 5 Analog FPV Drone - 5 inch FPV Drone - BNF
Comes with ELRS Receiver Soldered and Installed
DarwinFPV- Johnny 5 Tehnical Data
- Wheel base: 240mm
- Frame arm thickness: 5.5mm
- Frame kit material: 3K carbon fiber
DarwinFPV- Johnny 5 Reciver
- 2.4ghz ELRS Protocal Receiver
DrawinFPV 2207- 2400KV Brushless Motor
- Motor KV:2400KV
- Idle Current (Io/10V):0.81A
- Lipo Cell:3-4S
- Weight:36.4g
- Max Continuous Current:32A
- Max Continuous Power:765W
- Configu-ration:12N/14P
- Prop adapter shaft:M5
- Bolt holes spacing:16mm
- Bolt thread:M3
- 4 IN 1 50A BLHeli_S ESC
F4-50A stack
- Continuous current: 50A
- Peak current: 60A (10S)
- Lithium battery section number: 2-6S
- BEC: 5V2A
- ESC weight: 10.8g
- Firmware: BL_S
- Maximum support throttle signal: DSHOT600
- Mounting hole: M3 30.5 * 30.5mm
F4 Flight Controller
- Lithium battery section number: 3-6S
- BEC: 10V 1A, 4.5V, 3.3V
- MCU: STM32F405
- Gyro: MPU6000
- OSD: AT7456E
- Firmware: MATEKF405
- Weight: 7.2g
- Mounting hole: M3 30.5 * 30.5mm
- Support barometer, black box
- Bluetooth
- 5.8G 40CH 800mw VTX TX805P
VTX (Video Transmitter)
- Frequency: 5.8G Channels: 40CH
- Input voltage: 7V~24V
- 5V camera supply: 120mA(MAX)----25mW@12V 5V
- camera supply: 200mA(MAX)----200mW@12V 5V
- camera supply: 300mA(MAX)----600mW@12V 5V
- camera supply: 350mA(MAX)----800mW@12V Extra
- features: Smart audio
- Power supply: 5V output for Camera
- Output power: 25mW/200mW/600mW/800mW
- switchable Antenna connector: MMCX
- Cable connector: Solder pads
- Weight: 8g(excluding antenna)
More Information
| Flying Location | Outdoor |
|---|---|
| Skill Level | Intermediate |
| Copter Motor Type | Brushless |
| Quad Voltage | 4S - 14.8v |
| Quad Configuration | BNF (Bind and Fly) |
| Manufacture | DarwinFPV |
| Receiver Type | ELRS |
Reviews 5
Customer Reviews
- FantasticI Purchased the Bundle with RadioMaster Tx16S and batteries, everything worked flawless and Quad trim was perfect.
Posted on
- Good drone, great customer servicethis is my first 5" FPV drone. Had a problem with receiver binding and then all channels working. Talked to Will and he sent me a file to upload into drone thru betaflight. Worked like a champ. Then I couldn't get it to arm. Once again Will told me how to fix that. Drone ready to fly but I haven't had a chance to so yet due to weather and other factors. It looks great, hope it flies as well as it looks. I would like to give Will an A+ for all the patient help he gave me.
Posted on
- Great drone for beginnerPurchased this drone for first 5"drone fpv flying. First had problem binding the ELRS receiver with radio. Called store for help. Kim sent me a CLI file to use. Installed file and got an immediate bind. Then I couldn't get drone to arm. Called again and Kim immediately solved that issue. Since I am new to drone flying I am not sure what to look for but as far as I can tell the drone is well constructed. I hope It will withstand the many crashes I expect to have. I want to give an A+ to Grayson hobby customer support. Price is right.
Posted on
- Elrs Version for the Darwin FPV Johnny 5 BNFI purchased the Johnny 5 last week. I also couldn't get the ELRS receiver to bind to my Zorro ELRS Transmitter. The cause was that the RP1 receiver is shipped with ELRS 3.0 on it and my Zorro is running 2.0. I emailed Grayson Hobby and they answered back right away. I just wish there was some information about this included in the box. I wound up flashing ELRS 2.0 on the quad receiver and it bound up with no problem. I have flown several packs now and I really like the way the quad handles. I think it's a great quad for the money.
Posted on
- Darwin 240 Johnny 5Another quality product from Grayson Hobby . When I saw GH was expanding their Darwin line to a reasonably priced 5” I had to jump. I wasn’t disappointed. With 2207 motors it’s got power combined with a real smooth flight. Happy flying y’all
Posted on