Diatone Mamba Basic Stack - F405 MK3 Flight Controller & 50A Speed Controller
$89.99
Out of stock
Diatone Mamba Basic Stack - F405 MK3 FC + F50 50A BLHeli_S ESC
Details
Diatone Mamba Basic Stack - F405 MK3 FC + F50 50A BLHeli_S ESC
About this product:
-
The Diatone Mamba F405 MK3 Basic Stack brings BIG power all in a 30.5x30.5 mounting size! This stack can push 50A all while bringing you the latest features!
Features:
-
Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
-
The standard flight controller (30.5×30.5) adds a spare pad
-
Self-recovery insurance to the receiver's 5V power supply
-
LED signal selection (when Mamba Led system available)
-
Increased camera VCC power supply pad
-
TVS instant high voltage protection 30V
-
BEC short circuit protection
-
Super Big Soldering Pad
-
Increased pad area
Features
- Add I2C function
When you connect the USB, the receiver and OSD settings can be saved
Increase the pad area
LED signal selection (when Mamba Led sys avaiable)
BEC short circuit protection
TVS instant high voltage protection 30V
Design Update for 2022
F405 models support F.prot(Most)
Upgrade the anti-interference cable
Use Typec(Most)
The pad area of Mini flight controller (20×20) increased by 140%
Added for 2022
Add self-recovery insurance to the receiver's 5V power supply
Increase the camera VCC power supply pad
Standard flight controller (30.5×30.5) adds spare pad
Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator)
and reduces ripple interference
FC Specifications - MAMBA Basic F405MK3
- MCU: 168MHz STM32F45RGT6
- GYRO: MPU Series Six-Axis
- Barometer: Yes
- OSD: Yes
- Blackbox: 16M Flash Memory
- Uarts: 6Set
- ESC Soft: Dshot300/600
- ESC Telemetry: Yes
- Power Led: Yes
- LED Controller: BF LED/MB LED(4 Set 2812 LED)
- S/F.Port: Yes
- RSSI: Yes
- Buzz: Yes
- Input: 3~6S Lipo (12.6~25.2V)
- TVS Protection: Yes
- BEC:3.3V 0.5A& 5V 3A ( (System Power)&5V 3A(LED)& 9V 3A
- MOUNTING: 30.5mm, M3
ESC Specifications
- MAMBA F50_BLS
- INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
- CONTINUE CURRENT:50A×4
- BURST CURRENT:60A (10S)
- BEC: No
- Target:BLHeli_S CH40
- SOFT: Dshot300/600
- TVS Protection: Yes
- MOUNTING: 30.5mm/M3
Includes:
- High-Frequency 470uF/35V capacitor ×1
- 8pin sh1.0 harness ×2
- 12AWG 100mm wire ×2
- AMASS Original XT60
More Information
Manufacture | Diatone |
---|