More Views

Dynam Pitts Model 12 3D Airplane - Yellow



Regular Price: $179.99

Special Price $169.99

Quick Overview

Dynam Pitts - Yellow - 1070mm- PNP

Dynam Pitts Model 12 3D Airplane (PNP) - Yellow

The Dynam 'twin' Peaks will give intermediate to expert pilots a thrilling scale aerobatic experience unlike any other. The large wing area and light wing loading of its biplane design offers very forgiving flight characteristics while keeping roll response crisp and precise. The powerplant has plenty of power for for port or scale aerobatics, the Dynam Peaks will do whatever you ask and will look good doing it.

Key Features

  • Powerful BM3720 - 650KV outrunner brushless power system
  • 50A Brushless ESC with Switch-Mode BEC and XT60 connector 
  • Phenomenal 3D capable
  • Durable and lightweight EPO construction with many surface details
  • Detailed Body Structure
  • Suitable for both, intermediate and Experienced Pilots.
  • Easy to build. - Plan a bit longer build times than most dynam ARFs
  • XT60 Battery Connector


Wingspan: 42inch (1067mm)
Overall Length: 44.5 (1130mm)
Flying Weight: 45.9 (1300g) w/Battery
Motor Size: BM3720A-KV650 (installed)
Propeller: 13 x 6
Radio / Transmitter NOT INCLUDED (requeires 4ch radio - not included)
Servos: 4 servos installed ( 2 x 9g - 2 x 17g)
Speed Control : 1 x Dectrum 50A Brushless with Switch-Mode BEC with XT60 (installed)
Battery: NOT INCLUDED -requires a 2200 14.8v (not included)
Charger: NOT INCLUDED - requires a 4S lipo charger (not icnluded)
Flight Times Average (6-10 mins)
Assembly Time  60min - Abit longer than most dynam ARFs

Tech Notes

Please Do NOT use loctite on this airplane the locktite will weaken the integrity of the plastic and eventually will crack

This is a flying model.  This is NOT a toy....Before assembling any airplane and especially BEFORE assembling and gluing any parts together, take about 15 minutes to go over all the electronics. Make sure they are all working because in some circumstances, once the parts are glued, its very difficult to swap out components.  15 minutes in pre-assemble can save hours and hours of headaches after assemble.

You may also be interested in the following product(s)

Customer Reviews

Great Flyer, but... Review by Dan
Received the model quickly, thanks Grayson! First flight was very good, this thing flies great, horizontal stab was a little warped but did not effect the flight at all. Second flight attempt the ESC burned up on the ground as soon as I applied power to the motor. Smoke was pouring out of the model and I thought the plane was going to burn to the ground, it did not, it sustained very little airframe damage and no battery damage. I installed a 60 amp ESC and it is ready to fly again. (Posted on 3/9/2017)
Speedy and efficient service Review by peter collins
Received plane within 2 days of ordering. (Posted on 2/3/2017)
Great plane good price Review by Roger L Hatch
Contrary to many reviews of this plane the tail feathers were perfect. All parts were in the package and in good shape. Went together well. I did some of the mods I had read about and will maiden tomorrow morning. Quick shipping from Grayson.
Thanks. (Posted on 1/24/2017)

Write Your Own Review

You're reviewing: Dynam Pitts Model 12 3D Airplane - Yellow

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars