Grayson Flash Sale - Get these deal while the are hot!

More Views

Grayson Hobby Race Ready Custom RTF Wizard x220 - FrSky Qx7



Only 1 left

Regular Price: $349.99

Special Price $299.99


Quick Overview

Grayson Hobby Customized Ready To Fly Drone

Eachine Wizard X220 FPV Ready to Fly with FrSky Transmitter 

GraysonHobby Checks and Calibrates Every Single Wizard 220 Before Shipping!

Grayson Hobby has the professional staff and pilots which is required to check and calibrate EVERY RTF quad.  This is a very time-consuming process, but we can assure you, every component will be in perfect working order.  

Needed to Complete
What's in the box?
  • (1) Eachine Wizard x220 with the Grayson Gold Programming
  • (1)  FrSky XM+ Receiver (installed)
  • (10 Sets) 5040 Props (we HIGHLY suggest getting Dal 5046 Props)(4) Air Cowling for Props (link here)

 Software Setup

The Grayson Hobby professional staff loads our own Flight Controller configuration file which has been tweaked by our professional pilots. We also enable a few features which do not come standard from the factory making the Wizard from Grayson Hobby that much better and enjoyable.

Have No Time? We can help you.

Select the customized feature and let our expert staff, Bind, Configure, BetaFlight Program, and test hover your drone so when you get it out of the box, you just charge, fly.  No setup will be required if you have our staff setup your quad.

What's included with the Grayson Customization (extra not included with basic combo)

  • Setup Radio with End Points, SubTrims, Mixes,  switches
  • Bind Quad to Radio
  • Program Armining Switch Arm / DisArm on Radio and Quad (important safety feature)
  • Setup 3 Different Flight Modes in BetaFlight (Acro, Horizon, Airmode)
  • Setup Buzzer Switch
  • Assign Mode Switch on Transmitter (Acro, Horizon, Airmode)
    • The Angle Mode is auto-leveled making is a no-stress flying experience for the complete beginner or for flight training.
    • In Horizon Mode the drone is no longer limited by angle, allowing you to do flip and roll, auto-leveling directly after performing the trick.
    • In Acro Mode, the drone will fly like an airplane with no auto-leveling or angle limitation, making it great for flying around in large spaces.
  • Rates Switch - We all need to start somewhere, thats why we programmed, LOW, MEDIUM, HIGH Rates, use this feature as you grow with your skills, Start out low and progess to the High
Grayson Hobby Wizard

Hardware Setup

There are many components associated with every quad / drone which are NOT all assembled by the same person at the factory leaving just about every quad we have seen slightly different.  Either switches on the TX, Flight modes, even loose motors, trust us, we have seen it all.



FULL VIDEO MANUAL ( please watch - we get 100s of questions a week in which we cover in this video)


Wizard V2 Led



  • Wheelbase: 220mm
  • Eachine arm: 4mm carbon fiber
  • Flying times: 12 minutes
  • Weigh: 484g (with battery)
  • Take off weigh: 535g
  • Package size: 440 x 300 x 100mm
  • Package weigh: 0.95kg

Flight Control

  • F3 Flight Controller


  • 2205
  • KV : 2300
  • MAX thrust: 440g
  • Length: 32.2mm
  • NO.OF cell : 2-4S
  • Diameter : 27.9mm
  • Framework : 12N14P
  • Shaft : 3mm
  • Propeller :  5 inch
  • Weight: 25g


  • 5040 3-Blade Propeller
  • Color: purple
  • Quantity: 10 Pairs
  • Mounting Hole: 5mm
  • Weight: 137g
  • Size: 140*140*65 mm


  • Item name : 20A BLHeli_S  ESC
  • Con.Current : 20A
  • Peak Current(10s) : 25A
  • Input Voltage : 2-4S
  • BEC : No
  • Programming : YES
  • Firmware : Blheli_S
  • Weight :7.9g
  • Size(PCB) : 27*12mm


FPV Camera

  • Power supply : 3.6-5.5V (powered off TX)
  • Power consumption : 60mA @5V
  • Imager : 1/3” CMOS, 700TVL
  • Angle : 127° diagonal FOV, 110° horizontal FOV
  • FPV tuned light handling
  • System : PAL 
  • Lens : 2.8mm IR coated
  • FOV : 127°diagonal 110°horizontal (ideal for fixed camera)
  • Operation temperature : -20 to 70°C
  • Square : 29 X 29 X 23.5mm
  • Lens extrude (LxDia) : 15mm X 14mm
  • Weight : 12g

Video Transmitter 

  • Item NO.: TS5823S
  • Modulate : Wideband FM Modulate
  • Video Format  : NTSC/PAL
  • Output Impedance : 50 Ohm
  • Output Power : 23-24dBm
  • Channel:48 CH
  • Operating Voltage : 7V-24V
  • Supply Current : 190mA
  • Operating Temperature : -10~85℃
  • Video Band Width : 0~8.0 MHz
  • Audio Carrier Frequency : 6.5 MHz
  • Video Input Level : 0.8~1.2 Vp-p
  • Video Input Impedance : 75 Ohm
  • Audio Input Level : 0.5~2.0 Vp-p
  • Audio Input Impedance : 10K Ohm
  • Connector: RP-SMA Female (Inner needle)
  • Antenna Connector:  RP-SMA Male (Inner hole)
  • Dimension: 40mm x 23mm x 8mm
  • Weight: 7.3g


 Package included:

  • 1 x FrSky Transmitter
  • 1 x XM+ Receiver
  • 2 x Eachine MN2205 KV2300 brushless motor CW
  • 2 x Eachine MN2205 KV2300 brushless motor CCW
  • 4 x Eachine 20A BLHeli_S  ESC
  • 10 x Kingkong 5040 3-blade propeller purple CW 
  • 10 x Kingkong 5040 3-blade propeller purple CCW
  • 1 x F3 Flight Controller
  • 1 x 700TVL camera 
  • 1 x 5.8G 48CH 200mw transmitter
  • 1 x Antenna
  • 1 x Battery strap
  • 2 x Wrench

Eachine Wizard  Eachine Wizard RTF Eachine Wizard RTF Eachine Wizard RTF Eachine Wizard RTF Eachine Wizard RTF Eachine Wizard RTF

You may also be interested in the following product(s)

Customer Reviews

OSD PID Tuning Review by Farrider
You can tune PIDS and many other BetaFlight options in the OSD. You access this by using the transmitter. These instructions are for the Taranis.
Move the Yaw stick left and the Pitch stick up at the same time and the menu will appear.
the right stick up and down moves up and down the menu. Moving the right stick right selects and item to change.
This is a handy feature for tuning and changing options in the field.
You can set up the OSD display in BetaFlight.
Get one of these copters when Grayson gets them, they will go fast. Pick up the regular 220 now then move up to this when who knows when they will be available. (Posted on 7/6/2017)
Excellent Upgrade to the 220 Review by Farrider
I just received an early shipment of the 220S. Comes with Omnibus F4 flight controller which uses BetaFlight and has a built in OSD. The OSD is configurable in Betaflight. The Plug and Play version has a connector pre soldered to the SBus connection on the board. I used a small FRSky receiver .SBus is on UART 6 in BetaFlight
The camera is now a CCD with good image quality. It has a pagoda antenna which is OK.
ESC's are integrated on the board and not on the arms. It also has a programmable LED array on the back in addition to the LED's on the bottom of the arms.
Overall a nice upgrade to this economy quad. (Posted on 7/5/2017)

Write Your Own Review

You're reviewing: Grayson Hobby Race Ready Custom RTF Wizard x220 - FrSky Qx7

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars