GraysonHobby 200Amp Speed Controller (ESC) with 7amp Switching BEC

• Up to 200-amp continuous current with proper air flow, 250-amp peak
• 5-volt Switch-Mode BEC circuit capable of 7 amp continuous current on any recommended input voltage
• Drives up to 7 analog or 6 digital standard-sized servos, with the BEC on any recommended input voltage
• 2-7S Li-Po
• Finned heat sinks
• Programmable motor braking
• Safe power-arm mode prevents accidental starts
• Programmable low voltage cutoff with settings for 2-cell Li-Po (6V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V), 7-cell Li-Po (21v) or 75% of battery starting voltage
• Programmable soft start for helis and airplanes
• Auto motor shut down if signal is lost or there is interference
• Programmable timing—4 user-selectable ranges for use with a larger variety of brushless motors
• Programmable throttle input range (1.1–18 or Auto Throttle Range)
• Utilizes new smaller MOSFETs technology to minimize weight
• 12AWG on the battery input and on motor output leads

Product Specifications:

• Brake: Yes - Programmable
• Continuous Maximum Current: 200A with reasonable cooling
• Maximum Burst Current 250A - 30 sec with proper cooling
• Input Voltage: 7.2V - 25.9V (2s - 7s)
• Output Wire 12AWG
• Momentary Peak Current: 75A (15 sec)
• Length: 2.87 in (73mm)
• Width: 1.51 in (38.5mm)
• Height: 0.98 in (25mm)
• Weight: 2.3 oz (66g)
• Internal BEC 7Amp