GraysonHobby 50 Amp ESC & 5Amp Switching BEC with factory soldered deans
- Up to 50 amp continuous current with proper air flow, 60 amp peak
- 5-volt Switching BEC circuit capable of 5 amp continuous current on any recommended input voltage
- Drives up to 7 analog or 6 digital standard-sized servos, with the BEC on any recommended input voltage
- 2-7S Li-Po
- Finned heat sinks
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cutoff with settings for 2-cell Li-Po (6V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V), 7-cell Li-Po (21v) or 75% of battery starting voltage
- Programmable soft start for helis and airplanes
- Auto motor shut down if signal is lost or there is interference
- Programmable timing4 user-selectable ranges for use with a larger variety of brushless motors
- Programmable throttle input range (1.118 or Auto Throttle Range)
- Utilizes new smaller MOSFETs technology to minimize weight
- 14AWG wire with Factory Soldered Deans on the battery input
- 14AWG wire on motor output leads
Product Specifications:
Brake: | Yes - Programmable |
Continuous Maximum Current: | 50A with reasonable cooling |
Maximum Burst Current | 60A <30 sec with cooling |
Input Voltage: | 7.2V - 25.9V (2s - 7s) |
Output Wire | 14AWG |
Length: | 50mm |
Width: | 30mm |
Height: | 8mm |
Weight: | 1.8 oz (51g) - (as pictured) |
BEC | 5Amp |
Customer Reviews
- excellent Review by Jimmy J. Clifton
-
Rating - 50 amp esc Review by Eugene DePaul
-
Rating