Suppo 70Amp ESC w/ 5Amp Switching BEC - XT60

Special Price $30.99 Regular Price $50.00
Out of stock
GraysonHobby 70 Amp ESC, 5amp Switching BEC, speed controller
out of stock

Details

GraysonHobby 70 Amp ESC with 5Amp Switching BEC with Factory Soldered XT60 & Gold Bullet Connectors for the Motors

  • Up to 70 Amp continuous current with proper air flow, 80Amp peak
  • 5-volt Switch-Mode BEC circuit capable of 5 Amp continuous current on any recommended input voltage
  • Drives up to 7 analog or 6 digital standard-sized servos, with the BEC on any recommended input voltage
  • 2-7S Li-Po 
  • Finned heat sinks
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 2-cell Li-Po (6V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V), 7-cell Li-Po (21v) or 75% of battery starting voltage
  • Programmable soft start for helis and airplanes
  • Auto motor shut down if the signal is lost or there is interference
  • Programmable timing—4 user-selectable ranges for use with a larger variety of brushless motors
  • Programmable throttle input range (1.1–18 or Auto Throttle Range)
  • Utilizes new smaller MOSFETs technology to minimize weight
  • 14AWG on the battery input and on motor output leads

 

Product Specifications:

  • Brake: Yes - Programmable
  • Continuous Maximum Current: 70A with reasonable cooling
  • Maximum Burst Current 80A
  • Input Voltage: 7.2V - 25.9V (2s - 7s)
  • Output Wire 14AWG
  • Length: 2.16 in (55mm) Width: 1.49 in (38mm) Height: 0.31 in (8mm)
  • Weight: 2.64 oz (75g)
  • Internal BEC 5Amp

 

More Information

More Information
ManufactureSuppo
ESC Size70A +
BEC5A OnBoard BEC, Built-in Switching BEC

Reviews 1

Customer Reviews
  1. Satisfied
    Rating
    Enjoyed that the ESC already had connections attached. Took a little time to program because of operator error

    Review by Edward Wickware

    Posted on