Loading...

HappyModel Crux35 Digital HD FPV Drone DJI ELRS V2

$268.99
In stock
SKU
5A10027
Happymodel Crux35 4S HD Freestyle Racing Drone w/ Caddx Nebula Nano The Happymodel Crux35 is an ultra-lightweight 3.5" drone by Happymodel is an excellent micro racing drone that comes with the CrazyF411 flight controller, EX1404 brushless motors, and the Caddx Nebula Nano Vista to give you a great flying experience!
More Information
ManufactureHappy Model

About this product
The Happymodel Crux35 is an ultra-lightweight 3.5" drone by Happymodel is an excellent micro racing drone that comes with the CrazyF411 flight controller, EX1404 brushless motors, and the Caddx Nebula Nano Vista to give you a great flying experience! The HQPROP 3.5-inch three-blade propellers ensure the largest thrust-to-weight ratio.

Receiver options: Integrated SPI ELRS or SPI FrSky D8/D16

Note: SPI FrSky version comes with Betaflight 3.5.7 firmware in order to get a better RSSI range. Bind code is “Frsky_bind” in the CLI Command

VIDEO: Long Flight time Rippin // Crux35 // Super Agile!!

Features

  • Integrated ExpressLRS SPI receiver or Frsky SPI D8/D16 receiver
  • Ultra-lightweight 3.5-inch BNF FPV Freestyle Drone
  • Can be equipped with Naked Gopro or SMO4K
  • High efficiency EX1404 power system
  • HD video transmission
  • Supports 3-4S battery
     

Specifications

  • Receiver option: SPI ExpressLRS 2.4GHz or SPI Frsky D8/D16 (S-FHSS compatible)
  • Size: 130mmx130mmx45mm (without propellers)
  • Camera option: HD version Nebula Nano +Vista
  • Flying time: 9min~15min 4s 750mah battery
  • Weight: Crux35 HD 108gram
  • Product name: Crux35 HD
  • Wheelbase: 150mm
  • Brand: Happymodel

CADDX NEBULA NANO VISTA KIT

  • Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm
  • Hardware included:Vista/Nebula nano/Coaxial cable/Antenna
  • Dimensions: Vista Kit: 30x29x13mm Camera: 14x14x21mm
  • Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km
  • Operating Temperature Range: 32° to 104° F (0℃ ~40℃)
  • Weight: Vista KIT(camera included):24g/Antenna:2.5g
  • Power output: 25mW/200mW/500mW/700mW
  • Supported Flight Control System: F3,F4,F7
  • Min. Latency (end-to-end):720p 60fps: 32ms
  • Operating Frequency: 5.725-5.850GHz
  • I/O Interface: USB-C,IPEX,3-in-1 Port
  • Goggles: work with DJI goggles
  • Coaxial Cable:80mm/120mm
  • Camera:Sensor: 1/3''CMOS
  • FOV: 150°[D],122°[H],93°[V]
  • Input Power: 7.4-26.4V
  • Shutter: Rolling shutter
  • Lens: 2.1mm,f/2.1
  • Model: Vista Kit

CrazyF411 FC

  • Power supply: 2-4S battery input (DC 8V-17V)
  • Built-in Frsky D8/D16 SPI receiverBuilt-in 2.4G Power Amplification
  • Built-in voltage detectionFirmware target: MATEKF411RX
  • Built-in 20A(each) Blheli_S 4in1 ESC Dshot600 ready
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Built-in Betaflight OSD(SPI Control)
  • Board size: 28.5 * 28.5MM
  • Built-in Current meter
  • Built-in 5V 1.5A BEC

 

ONBOARD ESC

  • Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
  • Factory firmware: O_H_5_REV16_8.HEX
  • Support BLHeliSuite programmable
  • MCU upgraded to EFM8BB21
  • Default protocol: DSHOT300

PROPELLERS

  • Propeller Diameter: 3.5 inch
  • Material : Poly Carbonate
  • Hub Diameter : 10mm
  • Hub Thickness:4.7mm
  • Shaft :1.9/1.5/1.9mm
  • Adaptor Rings : NO
  • Weight : 1.5g
  • Blades : 3
  • Pitch : 2
  • MOTORS

Motor

  • Dimension(Dia.*Len):Φ15mm*15mm
  • Shaft Diameter: Φ1.5mm
  • Configu-ration:9N12P
  • Stator Diamter:14mm
  • KV options: KV3500
  • Stator Length:4mm
  • Mode: EX1404
  • Weight(g):9g

Recommended (Not Included)
Battery: 4S 750mAh or maximum 4S 1100mAh

Includes

1X Happymodel Crux35 4S HD Freestyle Racing Drone w/ Caddx Nebula Nano ( ELRS or FrSky Options)

More Information
ManufactureHappy Model
Write Your Own Review
You're reviewing:HappyModel Crux35 Digital HD FPV Drone DJI ELRS V2
Your Rating
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.