Loading...

Lemon Rx GEN2 10-Channel Stabilizer with DSMX, TEXTGEN Menu, XT60 Power Meter

Special Price $59.99 Regular Price $62.99
TEXTGEN ETA September 2024
Out of stock
SKU
LM0087XT60-PRE

Experience the ultimate in flight stabilization with the Lemon Rx GEN 2 DSMX Compatible 10-Channel Stabilizer, now featuring the TEXTGEN menu for effortless setup and precision control.

More Information
ManufactureLemon RC

Lemon Rx Gen 2 DSMX Compatible 10-Channel Stabilizer with TEXTGEN Menu

The new Lemon RX Gen 2 TEXTGEN airplane receivers are easier to use. Now, you can do most of the programming right from the screen menu on your transmitter. You can use a Spektrum Transmitter or a Remote Controller with Edge TX, like Radiomaster with 4-1.

What is the Lemon Rx?
The Lemon Rx GEN2 DSMX Compatible 10-Channel Stabilizer is a state-of-the-art receiver designed for remote control airplanes. This device integrates advanced telemetry features, including a built-in barometer, altimeter, energy meter, and internal temperature sensor, providing real-time data to enhance flight performance. Its high-sensitivity gyro, coupled with a proprietary stabilization algorithm, ensures responsive control for both electric and gasoline engines. The innovative TEXTGEN menu allows for intuitive setup via telemetry pages or radio stick movements. Compatible with both the RadioMaster 4-1 radio and Spektrum radios, this stabilizer supports dual aileron operations and includes robust failsafe protection, making it an ideal choice for serious RC hobbyists. You can pick up this product in-store or online at Grayson Hobby shop​

Features:

  • 10-Channel Stabilization: Ensures smooth and stable flight control.
  • TEXTGEN Menu: Enables easy setup via telemetry page and radio stick movements.
  • Spektrum Telemetry Compatibility: Access and adjust settings seamlessly.
  • New Casing Design: Updated label design to reflect the latest features.
  • Retained Button Functionality: Traditional setup method still available.
  • Failsafe Protection: Ensures safety and reliability.

Specifications:

  • Compatibility: DSMX
  • Channels: 10
  • Telemetry: Spektrum and TX16S with latest EdgeTx firmware
  • Setup Methods: TEXTGEN menu, Button setup
  • Dimensions: Compact design for easy integration

Product Highlights

  • Effortless Setup: With the TEXTGEN menu, configuring your stabilizer is now more intuitive and efficient.
  • Enhanced Stability: 10-channel stabilization for smoother flights.
  • Telemetry Integration: Seamless compatibility with Spektrum and TX16S radios.
  • Modern Design: New casing label to match the upgraded functionalities.
  • Safety First: Built-in failsafe features for reliable operation

Introducing the TEXTGEN Menu: Revolutionizing Stabilizer Setup
The existing product has been upgraded with the innovative TEXTGEN menu. This feature allows for the setup of the stabilizer without the use of physical buttons. Instead, users can configure settings through the Spektrum telemetry page and by moving the stick on the radio. The stabilizer casing now features a new label design reflecting these changes. However, those who prefer the traditional button method can still use it, as all previous features are retained.

Directions for Using the TEXTGEN Menu

  1. Ensure that the first four channels (control sticks) can reach approximately +/- 100%.
  2. For Spektrum radios, select the telemetry page that displays Lemon Rx telemetry.
  3. For TX16S radios with the latest EdgeTx firmware, a page will show text similar to the example below once the telemetry connection is established upon binding.
  4. Within the first 60 seconds after powering on the radio, move the two sticks to the lower left and lower right and hold. "Lm Rx Config" will appear in about 2 seconds. Release the sticks at
  5. this point. Use the right stick left/right to navigate the menu (Blue arrow indicates the current active menu). The right stick up/down functions as "Enter" or "Change".
    Browse through and adjust all settings except enabling failsafe. Ensure to select "Save & Exit" for changes to take effect.
  6. Enjoy the convenience and precision of the TEXTGEN menu for all your stabilizer settings!

Lemon RX Quick Reference Guide

The generation 2 DSMP 10-channel telemetry stabilizer is a complete redesign that provides the ultimate reliability, features and performance.

  • Choices of voltage and current sensors with exceptional capability:
    • XT60 / T-Plug: 5S LiPo (21V max), 60A max.
    • Voltage Probe: 45V max.
  • DSMX / DSM2 compatible, 7-channel full-range telemetry stabilizer with full telemetry features including a built-in barometer with vario, altimeter, energy meter (Current, Voltage, mAh), and internal temperature sensor
  • High sensitivity gyro with proprietary stabilization algorithm ensures responsive airplane control for both electric and gasoline engine applications
  • BEC1 and BEC2 dual inputs allow high-reliability operation while improving setup for high current drain performance servo
  • Built-in Delta, V-tail, and Normal Wing mixer
  • Supports stabilization with separated channel dual aileron operation
  • Stabilization always-on feature
  • Real-time variable stabilization gain control on channel 8
  • All-channel failsafe
  • Firmware health monitoring software stack and ultra-low operational voltage (3.6V) ensure the highest hardware reliability
  • Generation 2 SDR stack ensures the fastest channel searching and advanced algorithm for signal recovery with ultra-low-latency experience
  • Antenna diversity improves the reliability of the wireless link
  • Satellite port for additional signal diversity
  • Gyro stabilization activation with either AUX2 or Gear channel
  • 3 potentiometers for individual gain tuning

Reset the Stabilizer

  • Connect power to the stabilizer.
  • Hold the F and B buttons for approximately 5 seconds until all LEDs flash randomly.
  • Press the C button. Multiple LEDs will flash a few times to complete the operation.

Bind with Bind Plug

  • Insert the bind plug into Channel 8.
  • Connect power to the stabilizer.

Bind without Bind Plug

  • Connect power to the stabilizer.
  • Hold the B button until the red LED flashes.

Bind with a Satellite without a Bind Plug

  • Connect power to the stabilizer.
  • Hold the B button until the red LED flashes.
  • Disconnect power.
  • Plug the satellite wire connector into the stabilizer.
  • Connect power again.

Failsafe

  • Connect power to the receiver and ensure the servos are working with the transmitter.
  • Press the F button for 3 seconds until the green LED changes from off to on and vice versa to change the failsafe setting. The channel value is saved as failsafe default at the time the green LED turns on.
  • Turn off the transmitter and wait 2 seconds to ensure the failsafe is activated accordingly by checking for torque generated with finger-pushing the servo linkage if it was set.

Stabilization Activation Switch

  • Disconnect power from the stabilizer.
  • Insert the bind plug into Channel 5.
  • Hold the C button.
  • Connect power. Wait for about 1 second until the 6 LEDs flash.
  • Release the C button.
  • Press the C button to make changes within 3 seconds. Green = CH7, Blue = CH5.
  • Wait for 3 seconds and remove the bind plug.

Wing Mode and Dual Aileron

  • Disconnect power from the stabilizer.
  • Insert the bind plug into Channel 6.
  • Hold the C button.
  • Connect power. Wait for about 1 second until the 6 LEDs flash.
  • Check the receiver label/user manual to understand the referred LEDs' operation.
  • Release the C button.
  • Observe which red LED is flashing and briefly press the C button to select the required mode.
  • Press the C button to toggle between settings. On means selected. Exit automatically in 5 seconds.
  • Wait for 3 seconds and remove the bind plug.
  • Ensure transmitter mixing is set accordingly for dual aileron if stabilized dual aileron is to be configured.

Gyro Direction

  • Check the receiver label/user manual to understand the referred LEDs' operation.
  • Connect power and wait 1 second.
  • Hold the C button and wait for about 1 second until the 6 LEDs flash.
  • Release the C button.
  • Observe which red LED is flashing and briefly press the C button to select the required mode.
  • Press the C button to toggle between settings. On means selected. Exit automatically in 5 seconds.
  • Wait for 3 seconds and remove the bind plug.

V/I Sensor Calibration

  • Turn on the receiver and transmitter. The telemetry report page may optionally be checked during and after calibration.
  • Plug the V/I sensor. Make sure the required DC loading device such as a brushless motor with ESC and the current and voltage meter is connected.
  • Press the F and B buttons together at the same time for 2 seconds but no greater than 5 seconds.
  • Observe 3 green LED flashes. Ensure 8.4V is provided to the V/I sensor.
  • Press the F or C button briefly.
  • Observe 3 red LED flashes.
  • Turn on the DC loading device by throttling the transmitter. Ensure 4A is drawing across the V/I sensor. Be careful with the motor spinning if it is to be used.
  • Press the B button to save and exit.

Voltage Probe Calibration

  • Turn on the receiver and transmitter. The telemetry report page may optionally be checked during and after calibration.
  • Plug the voltage probe into the receiver.
  • Press the F and B buttons together at the same time for 2 seconds but no greater than 5 seconds.
  • Observe 3 green LED flashes. Ensure 8.4V is provided to the voltage probe sensor. A fully charged 2S LiPo is very close to 8.4V and may be used.
  • Press the F or C button briefly.
  • Observe 3 red LED flashes.
  • Press the B button to save and exit.

Gain Setting

  • Adjust via the 3 dials or real-time master gain on Channel 8 depending on the transmitter channel's availability.

View Setting LEDs with All On

  • Press the C button briefly (no more than 2 seconds).
More Information
ManufactureLemon RC
Write Your Own Review
You're reviewing:Lemon Rx GEN2 10-Channel Stabilizer with DSMX, TEXTGEN Menu, XT60 Power Meter
Your Rating
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.