Matek F722 PX W for Fixed Wings
$9.99
Out of stock
The Matek F722-PX-W Power Distribution Board (PDB) is specially designed to connect directly to the Matek F722-PX Flight Controller. This two combinations enable Fixed Wing usage for the latest F722-PX Pixel OSD FC. The PDB breaks out common ports and solder pads for servos and esc connections and connects via a ribbon cable to the flight controller.
This board also uses the standard mounting hole patterns found in most Mini Quads and can also be used with other flight controllers, using solder pads to connect to the flight controller.
Details
Matek Systems FIXED WING PDB FCHUB-W
The Matek F722-PX-W Power Distribution Board (PDB) is specially designed to connect directly to the Matek F722-PX Flight Controller. This two combinations enable Fixed Wing usage for the latest F722-PX Pixel OSD FC. The PDB breaks out common ports and solder pads for servos and esc connections and connects via a ribbon cable to the flight controller. This board also uses the standard mounting hole patterns found in most Mini Quads and can also be used with other flight controllers, using solder pads to connect to the flight controller.PRODUCT DESCRIPTION
PDB
- Input voltage range: 9~30V (3~6S LiPo) w/TVS protection
- 2x ESC power pads
- Current Sensor: 104A, 3.3V ADC, Scale 317
- 4x BEC on board
- 3x LED indicators for 5V, 10V & Vx
Soldering Holes & Pads
- + & – : Battery & ESC power pads
- Curr: Current sensor output
- Vbat: Battery voltage
- G: Ground
- 3V3: LDO 3.3V
- 5V: BEC 5V
- 10V: BEC 10V
- Vx: BEC 5V/6V/7.2V ADJ
FFC connection
- Compatible with MATEKSYS FC F405-STD, F722-STD, F405-OSD
- MT1: Motor1 of INAV Flying Wing & Airplane
- MT2: Motor2 of INAV Flying Wing & Airplane
- SV3~SV6: Servo 3~6 of INAV Flying Wing & Airplane
- VTX: Video Transmitter signal
- TX5 & RX5: UART5 of F405-STD/F722-STD/F405-OSD
BEC 5V output
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, GPS module
- DC/DC synchronous buck regulator
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 2 Amps, Max.3A
- Output Ripple: 20mV (VIn=24V, VOut=5V@2A load)
- Short-circuit tolerant (2 seconds)
BEC 10V output
- Designed for Video Transmitter, Gimbal
- DC/DC synchronous buck regulator
- Voltage: 10.0 +/- 0.2VDC (Input voltage >11V)
- Continuous current: 2 Amps, Max.3A
- Output Ripple: 20mV (VIn=24V, VOut=10V@2A load)
- Short-circuit tolerant (2 seconds)
BEC Vx output
- Designed for Servos
- DC/DC synchronous buck regulator
- Voltage adjustable, 5V Default, 6V or 7.2V via jumper
- Continuous current: 5 Amps, Max.5.5A
- Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)
- Short-circuit tolerant (2 seconds)
BEC 3.3V output
- Designed for Baro / Compass module and Spektrum RX
- Linear Regulator
- Continuous current: 500mA
Physical
- Mounting: 30.5 x 30.5mm, Φ3mm
- Dimensions: 52 x 36 x 6 mm
- Weight: 13g
More Information
Manufacture | Matek Systems |
---|