RC Flying EPP Eagle Combo & Electronic Bundle | Radio Control Flying Eagle

Radio Control Flying Eagle || PrePainted Raptor | EPP (1430mm WingSpan)

PrePainted Kit comes with the epp foam Eagle Kit (unassembled)  and electronics package combo

If you have not seen the this EPP RC Raptor then you MUST see this bird.  Not only does this kit come from high quality material and dense EPP, it only takes 1-2 hrs to get it flight worthy.  Everyone at your local flying field will be certain to ask you about this Eagle.  You will also intrigue the local wildlife and with out a doubt will come to investigate this new comer.  On our maiden flight of the EPP RC Raptor, several crows chased us around and then the resident hawk made sure we knew it was his field. 

The EPP Eagle Kit is an artistically crafted RC airplane. This excellent aerodynamic design of wings and V-tails allows excellent control even in a very low flying speed.   Add the optional ailerons and you have yourself a very maneuverable bird!  It is made of Expanded Polypropylene (EPP) material which is very crash friendly material!

 EPP is used to absorb energy such as automotive vehicle bumper cores, therefore is very durable and has high crash-landing tolerance. Each piece in the kit is made by the CNC machine with 100% precision.

It is easy to assemble and the instruction is included in the kit. Experienced pilots can use customized radio and power parts. The large surface area of the main wings design allows the high loading weight 

• PrePainted EPP Eagle
• Looks like a real bird flying in the Air!!
• Removable Wings for easy transport and storage.
• Made from EPP foam - this bird is super easy to fly, but if you do crash, repairs are very (hot glue or foam-tac)
• Great for thermalling due to the large wings and low weight.

• bottom of fuselage
• side of fuselage (left & right)
• top cover of front fuselage
• top cover of rear fuselage
• motor mount
• v - tail foam (left and right)
• triangular tail locking strip
• main wing (left and right)
• wing tip of the wing (left and right)
• main wing front edge
• firewall carbon fiber stick 500mm (for main wing backbone)
• push rods
• control horns
• wood stik
• screws rubber bands
• carbon fiber spars
• pushrods

Build Tips

This is made for easy flying and when I assembled my Eagle, I used the foam cure.  Its a contact cement material and takes overnight to fully dry.  Using this foam cure / foam tac glue makes this for an extremely light build.  Remember the lighter the better!  - But if you are wanting to put this together in a few hours, then regular CA & CA Accelerator will work. The CA 'fuses' the foam together, so once its glued, is never coming apart.  This glue adds a few oz of weight to the entire build and if you crash, the EPP will tear rather.  If you crash using the foam cure, the joints just come apart ready to be glued back together.  This is totally your call which glue you use.  I actually use a bit of both.  The CA on the edges to hold the majority of the parts together while the foam cure fully cures.