Customers Who Bought This Item Also Bought
Special Price $12.99 Regular Price $18.00
SKU
MG958
- Buy 5 for $10.49 each and save 19%
- Buy 10 for $9.99 each and save 23%
TowerPro MG958 Digital Metal Gear Servo
Manufacture | TowerPro |
---|---|
Servo Size | Standard |
Servo Type | Digital |
Servo Direction | Normal |
Servo Gear Type | Metal Gear |
Frequently Bought Together
- TowerPro MG958 Digital Metal Gear ServoSpecial Price $12.99 Regular Price $18.00
- TowerPro SG-5010 - Standard ServoSpecial Price $7.99 Regular Price $15.00
- TowerPro MG90S Metal Gear ServoSpecial Price $7.49 Regular Price $9.99
Total price
Write Your Own Review
4.9
60% of customers recommend this product
Top customer reviews
- Very good servo 1 people found this helpfulI bought these servos because of the specs and low price. I’ve used them for over a year in two 20cc size aerobatic planes without any problems at all. They have plenty of Torque and speed at 4.8 volts. The MG 958 servo has proven to be a very good servo at any price, but for less than $9 you can’t beat this deal.
- Super Deal 2 people found this helpfulExceptional value. Very strong torque and holding power. Return to center, very good. Installed 7 of these in 30cc RV4. Will order more as I need them.
- Great service! 0 people found this helpfulI haven't had the chance to use the servo yet but I will say that the service and speed of Grayson Hobby is excellent!
- Tower pro mg958 0 people found this helpfulGreat servos
- Excellent! 2 people found this helpfulWhen I found this servo I was very hesitant about buying them for my 26% mxsr but sure am glad I did buy them now. These servos are strong they center well and for the price they cant beat it. Hope they get more soon!
- TP MG958 SERVO 0 people found this helpfulVery good servo for my 600 heli. and a very good company to buy from, fast shipping.
- Tower Pro MG958 0 people found this helpfulThis servo is excellent, it has excellent centering capabilities. For the price think it's hard to beat.
- Stress Test Summery 2 people found this helpfulMultiple test were conducted with 1 TowerPro MG958 servo, 3 position servo tester "user controlled, center & nonstop wiper mode" using 6.6v lifepo4 charged to 7.2v. Stress test lasted 1hour lifting a 5.5lb weight in "nonstop wiper mode" at the furthest distance 1.25" from servo center with the supplied arm. The max weight that the servo would lift in wiper mode at that distance was roughly 13lb. After 2 minutes the servo started slowing down. I believe the servo tester couldn't supply the amp draw for the additional weight. Both pre & post stress test the servo centered fine "with and without the 5.5lb weight". The servo got hot to the touch during the stress test but never hot enough to burn. My conclusion if you're ok with the servo speed then these will work well in any size Glow airplane up to 30cc full on 3D airplane. Large scale i.e. 1/3 Balsa USA kits & other non 3D they should also be fine. I wouldn't recommend these for any 50 to 150cc 3D airplanes. I think the control surfaces are too large for the servos to hold up. With all that being said I purposely tried to make the servo fail and it didn't
- Fair price, fast speed, centers properly 0 people found this helpfulHave not open these servos up as of yet, probably will be late winter or early spring, past experience proves to be a good fast reliable servo.