Walksnail Avatar HD Mini 1s Lite Kit (VTX - Camera - Antenna)

About this product

The Walksnail Avatar HD Nano Camera / Mini 1S Lite VTX Kit features a nano digital camera, antenna, and Mini Lite VTX (with heatsink) that works with HD Goggles such as the Walksnail Avatar and Fat Shark HD Dominator. This mini HD  VTX combo has lower latency than the competitor at an average of 22ms, with an onboard DVR, 5.8GHz frequency, 8Gb internal storage, and a switchable aspect ratio.

Note: This improved version of the mini VTX board is smaller but still includes the heat sink. This kit includes the original nano camera, not the lite camera. The overall weight is 10g.

• New version of VTX
  Avatar HD mini 1S lite kit comes with the smaller, lighter and stronger new version VTX board, 30*30mm size, 5.1g, which can be installed in smaller drones.
• Brand new camera
  Avatar HD lite camera weighs only 1.8g, but with 2.1mm lens and 170°FOV, which can bring you a clearer, more realistic image quality.
• High quality, low latency
  Weighing only 7.8g, but avatar mini 1s lite kit supports 1080P/60fps, 720P/100fps high definition FPV image quality with a average 22ms ultral-low latency, bring you a beautiful clear 1080P digital FPV video and an unforgettable flying experience
• 8G Built-in Storage
  The Avatar vtx comes with 8g built-in storage, it can record 1080p or 720p HD and interference-free flight footages without adding an extra SD card and an action camera, reducing the overall weight of the drones and extending the flight time, allowing you to experience a more comfortable flight while recording 1080 HD videos.
• Canvas Mode
  Supporting Betaflight, kiss, Inav, Ardu full OSD display and customization, you'll be able to customize various OSD fonts, colors and patterns you like and easily adjust the parameters you want via remote control.
• 3.1-5V input, max 350ms output
  The avatar mini 1S lite kit is special designed for 65mm/75mm tiny drones, with 3.1-5V voltage input and 350mw power output, you'll be able to fly all kinds of tinywhoops in a amazing video quality and range.

Specifications

Camera
 

• Model   Avatar lite camera
• Image Sensor 1/2.7”1nch
• Resolution   1080P/60fps,720P/120fps,720P/60fps
• Ratio 16/9  4/3
• Lens 2.1mm
• FOV 170°
• Aperture  F2.0
• Shutter Rolling Rolling shutter
• Min.Illumination 0.001Lux
• Weight 1.8g
• Dimensions 14*14*16mm
   
   
  VTX
   
• Model Avatar mini 1s module
• Communication Frequency 5.725-5.850GHz
• Transmitter Power (EIRP) FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;  MIC:<25dBm
• I/O Interface JST1.0*6(Power in)JST0.8*4(USB)
• Mounting Holes 25.5*25.5mm
• Dimensions30*30*6.5mm
• Storage 8G
• Recording 1080p/720p
• Weight 5.1g
• Operating Temperature -20-40℃
• Channels 8
• Wide Power Input  3.1V-5V
• Supported FC System Betaflight
• OSD Canvas mode
• Bitrate 25mbps 50mbps
• Latency Average delay 22ms
• Antenna IPEX
   
   
  
  Packing List
   
• Avatar Mini 1S lite KIT  X1
• 4 Pin USB Cable X1
• 4 Pin Power Cable X1
• 1.4 ×8mm Screws  X4
• 1.4×10mm Screws  X2
• M2 Anti-vibration Rubber Dampers *6mm X4